työsuunnitelma 26 toukokuuta 2008

Suorittaja Haroun Hadadi

Tutkinnon osa Rakennustekniikka/ Rakennusalan perustutkinto

Tutkinnon osa Ulkoverhous- ja kattotyöt

Sisävalmistusvaiheen kirvestyöt

Suorituspaikka Omakotitalo Esko Lehikoinen (Lehmo-Cuisine, Lehmo)

Osoite Niputtajantie 40, 80710 Lehmo.

Työryhmän koko Harri Korhosen rakentaja-kirvesmies Jukka, Esko Lehikoinen (talon omistaja), ja minä.

Kuvaus näytöstä Sisävalmistusvaiheen kirvestyöt;

Saunarakentaminen, listoitustyöt, panelointityöt.

tehdä sisävalmistusvaiheen töitä kuten seinien ja kattojen levytys, panelointityöt ja listoitukset, osaan tehdä sisävalmistusvaiheen töihin liittyvät mittaustyöt. Osaan vastaanottaa, siirtää ja työstää sisävalmistusvaiheessa käytettäviä materiaaleja. Osaan työhöni liittyviä aloitus ja lopetustöitä. Osaan lajittelun ja uusiokäytön periaatteet ja arvioida oman työni laatua.

Ulkoverhous- ja kattotyöt;

Osaan suunnitella työni piirustuksien ja /tai rakennetta koskevan työselityksen avulla. Osaan tehdä materiaali- ja työmenekkilaskelmia. Osaan suullisesti esitellä ja arvioida omaa työtäni. Osaan tehdä ulkoverhoustöitä kuten puuverhoukset tuulensuojasta valmiiseen pintaan sekä pieli- ja räystään aluslaudoitukset. Osaan vastaanottaa, siirtää ja työstää työssäni käytettäviä materiaaleja. Osaan työhöni liittyviä aloitus ja lopetustöitä. Osaan lajittelun ja uusiokäytön periaatteet. Osaan arvioida oman työni laatua.

Työlle asetettavat laatuvaatimukset

Runko RYL 2000, siisti työnjälki.

Suurimmat virhemahdollisuudet

Kulmat, koolauslautojen suoruus, tuulensuojalevyjen tiiviys, mittaukset…

Työaikalaskelma

Saunarakentaminen 1vko

WC:n lattian vesieristeen laittaminen 2 tuntia

Listoitustyö 1pv

Vanhan julkisivun purkaminen 2pv

Suojalevyn laittaminen 2-3pv

Koolauslautojen laittaminen 4 tuntia

Ulkoverhouspanelointi 1vko à

Ikkunanpielet 2pv

Aluslaudoitus 6 tuntia à

Materiaalilaskelma

Ulkoverhouspaneeli 160mmx21mmx1300m / hukka 10%

Tuulensuojalevy 174m2 / hukka 5%

Koolauslauta 250m / hukka 5%

Tarvittavat työvälineet, koneet ja laitteet

Jiirisirkkeli, pöytäsirkkeli, kirvesmiehen käsityökalut, akkuporakone, paineilmanaulain, paineilmakompressori, tasolaser, vatupassi.

Työturvallisuuden huomioiminen

Varovaisuus, suojalasit, hanskat, turvakengät, kypärä, kuulosuojaimet…

Liitteet mm:

Kuvia & tekstiä osoitteessa: http://thehousethatwood.blogspot.com/

26th of may

23rd of may

22nd of may

may 16th 2008 -21th of may 2008ripping of the facade(julkisivu??)

ripping of the planks

suojalevyt ja pätkät



preparing and painting the bnew wallboards
old reliable and a nailgun are what we will need this time, the teline comes later when we get higher up
first we meanure with a lazer to make sure we put the first boards straight. after all we want the house to look straight.
fisrst one going up



cutting everything to size and put it where it belongs, some measuring cutting and there i go. i do have to admit that my nailhitting practise is getting a top grade, nothing but straight in. humph my arm is almost falling of.

Harry in Finland

may 15th 2008 Finishing the sauna, starting to put frames in the ceiling corners

More sauna work

More work on the sauna today.

This is the door we installed yesterday.If you look at the background you will see the the extra planks on the wall, inside them we put small lights(12).the last picture is the start of tha wall with lights.
the footstool we made
side panelling for the bench

More coming tommorow

Harry in Finland

more sauna and toilet work

Hello again,

Another day just flew by, and i learnt lots again.
I am actually having fun at this job.

Today i was told that with a circlesaw, a drill AKA screwdriver and a saw you can build almost anything.
In joints we predrilled holes for screws and added some glue for extra strenght.


A wonderfull tool the circle saw, very usefull for cutting to size planks and small board, cutting in angles or diagonally.

second layer or lower bench of the sauna. in its bginning stages.

Second attachment

while waiting for some wood we decided to put the sauna door.

the sides of the premade door have to fixed to fit over the tiles in the frame of the door.


We cut a small peace of wood from the bottom to make the door fit.after that we used the waterpass to level the doorframe in the doorway and attached the door with big screws to the frame. We then measured to see if the widths were correct and level and finally attached the door. I will put a picture of that tommorow.

The bottom bench. The corner pieces were premade, the glued in place for extra strenght with b3 glue, the straight pieces I precut to size and glued in place on the frame. a few hours later when the glue had dried we screwed the screws in from underneath for a clean smooth look.
Why underneath? for a simple reason. If you put them on top, lets just say that you would not like to have tattoo's burnt on you behind in the shape of a screw.

A small bench or foot stool in progress made to fit around the "kiuas"(sauna heater).
Because the floor is not completely level we tried to adjust the feet so the bench stands straight on the slanting floor. a good trick i learnt is to put a piece of wood on top and stand on it, if it was not stable enough we then adjust the legs accordingly.


A bit of tiling, i am not an expert but it turned out well. Yesterday we put a second layer of waterproofing. The man that was showing me how to do the first ones helped me with cutting out the tiles that needed to be cut special for parts that had to be clear. His breath smelled like he had just been drinking a bottle of vodka and i must confess i was glad to see him go.

Hehe we spent a whole hour looking for the drainage ring that was missing. but when we did finally find it the place looked a little bit cleaner.

WATERPROOFING AND BUILDING A SAUNA

Hello ,


Today it was an absolutely nice day.
we have been waiting for a week for the carpenter to come back but now that he is here we finally got started on all the good stuff.

The assignment for today was starting work on the sauna walls and the benches and waterproofing the toilet.
I had a great time learning and absorbing all the things the carpenter was teaching me.
He is very kind and takes time to explain every step and action he takes when building the sauna.
here are some pictures of the work we did in 2 days.










I also did some waterproofing while the carpenter was gone.
Good thing i learnt it already, and it was easy do to.
fisrt i put waterproofing in the corners then put the canvas on top and waterproofed the under the flap and then on top. When that was done i painted the waterproofing from corner to corner, put canvas from one end to the other and waterproofed on top of that. the toilet hole then had its turn followed by rhe whole floor. tommorow whe will put a second layer, let it dry and the cut out and fix the toilet and the drainage hole.
here is some more pictures. as you can see the corners and folds are not straight and in some places it was just isolation and nothing else, still for a first time i did follow the instructions i have had and was told i did a good job at it considering it was the first time ever and that the toilet there was not realy correctly done and hard to waterproof.
Here are some pictures.


More tommorow

Harry in Finland